ES ordening

ES/ES assignment 4/ES assignment 3 I2C/Assignment-A/main.cpp

@@ -0,0 +1,37 @@
+#include <Arduino.h>
+#include <Wire.h>
+#include "BME280.h"
+
+void setup() {
+    Serial.begin(9600);
+    Wire.begin();
+
+    Serial.println("Initializing BME280...");
+
+    uint8_t id = BME280_GetID();
+    Serial.print("Sensor ID: 0x");
+    Serial.println(id, HEX);
+
+    BME280_Reset();
+
+    // Set oversampling for humidity = x1 (00000001)
+    BME280_CtrlHum(0x01);
+
+    // Set oversampling for temp and pressure = x1, mode = normal (00100111)
+    BME280_CtrlMeas(0x27);
+
+    Serial.println("BME280 Setup Done.");
+}
+
+void loop() {
+    long temp_raw = BME280_ReadTemperature();
+    int hum_raw = BME280_ReadHumidity();
+    long press_raw = BME280_ReadPressure();
+
+    Serial.print("Raw Temperature: ");
+    Serial.print(temp_raw);
+    Serial.print(" | Raw Humidity: ");
+    Serial.print(hum_raw);
+    Serial.print(" | Raw Pressure: ");
+    Serial.println(press_raw);
+}